The AT899 subminiature omnidirectional microphone is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. Includes a clothing clip, viper clip, magnet clip and lanyard, two windscreens, two element covers, three single mic holders, and two double mic holders.
AT899cH-TH: 55″ (1.4 m) permanently attached cable terminated with a screw-down 4-pin connector for use with Audio-Technica cH-style body-pack wireless transmitters; no power module, in “theater” color (beige).
Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility Operates on battery or phantom power (wired configuration) All wireless models available in either low-reflectance black or beige Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens 9.8′ (3.0 m) cable permanently attached to mic (termination dependent) RoHS compliant—free from all substances specified in the EU directive on hazardous substances Microphones Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Omnidirectional Frequency Response 20-20,000 Hz Low Frequency Roll Off 80 Hz, 12 dB/octave (wired only) Open Circuit Sensitivity Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa Output Impedance Phantom: 200 ohms – Battery: 250 ohms (wired only) Maximum Input Sound Level Phantom: 138 dB SPL, 1 kHz at 1% T.H.D. Battery: 116 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range Phantom: 108 dB, 1 kHz at Max SPLBattery: 86 dB, 1 kHz at Max SPL (wired only) Signal-to-Noise Ratio 64 dB, 1 kHz at 1 Pa Phantom Power Requirements 11-52V DC, 2 mA typical (wired only) Battery Type 1.5V AA/UM3 Battery Current/Life 0.4 mA / 1200 hours typical (alkaline) Switches Flat, roll-off (wired only) Weight (Microphone) 0.02 oz (0.5 g) Weight (Power Module) 3.6 oz (102 g) (wired only) Cable 9.8′ (3.0 m) long (permanently attached to microphone), 0.08″ (2.0 mm) diameter, 2-conductor, shielded cable (termination dependent) Dimensions Microphone 16.0 mm long, 5.0 mm diameter – Power Module 145.0 mm long, 21.0 mm diameter (wired only) Dimensions (Power Module) 5.71″ (145.0 mm) long, 0.83″ (21.0 mm) diameter Dimensions (Microphone) 0.63″ (16.0 mm) long, 0.20″ (5.0 mm) diameter Output Connector (Power Module) Integral 3-pin XLRM-type (wired only) Accessories Included AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; battery (wired only); protective carrying case Audio-Technica Case Style M29
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.