
The Audio Technica System 10 Pro is a 2.4 GHz digital wireless system with a rack-mount receiver chassis, two receiver units, an ATW-T1002 handheld dynamic unidirectional microphone/transmitter, and an ATW-T1001 UniPak transmitter. Choose a Wireless Essentials microphone or cable to complete the system.
The half-rack chassis supports local receiver operation or remote mounting up to 328 feet away via Ethernet cable. Up to five chassis (10 receiver units) can be linked with the included RJ12 cable for simultaneous use of up to 10 channels. The system has diversity reception (frequency/time/space), a dynamic range of >109 dB (A-weighted), typical, a 20 Hz to 20 kHz frequency response depending on microphone type, and an operating range of 60 m (200′) in an open range environment with no interfering signals. Its operating temperature range is 0C to +40C (32F to 104F); battery performance may be reduced at very low temperatures.
The receiver provides an RJ45 remote receiver connector and an RJ12 link connector. Maximum output levels are 0 dBV via balanced XLR and +6 dBV via unbalanced 1/4″ (6.3 mm). It uses a 100-240V AC (50/60 Hz) to 12V DC 0.5A switched-mode external power supply. Receiver dimensions are 209.8 mm (8.26″) W x 44 mm (1.73″) H x 169.3 mm (6.67″) D; net weight is 940 grams (33.2 oz). Included accessories are an AC adapter, link cable, rack-mount adapters, joining plate, and rubber feet.
Both transmitters have 10 mW RF power output and spurious emissions following federal and national regulations. The body-pack has a four-pin locking connector (Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V); it uses two 1.5V AA batteries, not included, with >7 hours battery life on alkaline batteries depending on battery type and use pattern. Its dimensions are 70.2 mm (2.76″) W x 107.0 mm (4.21″) H x 24.9 mm (0.98″) D and net weight is 100 grams (3.5 oz) without batteries. The handheld uses two 1.5V AA batteries, not included, with >7 hours battery life on alkaline batteries depending on battery type and use pattern; it measures 254.8 mm (10.03″) long x 50.0 mm (1.97″) diameter and weighs 280 grams (9.9 oz) without batteries. An AT8456a Quiet-Flex stand clamp is included.
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.