This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.
Product Overview The AT4041SP Studio Pack offers two AT4041 studio condenser microphones. Engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound, the AT4041 features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.
Applications Drum overheads Acoustic guitar Piano Horns Under snare pickup Includes (2) AT4041 Cardioid Condenser Microphones (2) Stand clamps (2) Windscreens Wooden storage case Features Smooth, extended frequency response with a slight rise occurring in the high-frequency region Ideal for drum overheads, acoustic guitar, piano, horns and under snare Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards Switchable hi-pass filter and rugged turned-brass microphone housing Specifications Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 20-20,000 Hz Low Frequency Roll Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity: -36 dB (15.8 mV), re 1V at 1 Pa Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 121 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa Phantom Power Requirements: 48V DC, 3.2 mA typical Switches: Flat, roll-off Weight: 4.2 oz (120 g) Dimensions: 6.28″ (159.5 mm) long, 0.83″ (21.0 mm) body diameter Output Connector: Integral 3-pin XLRM-type
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.