Designed for use with guitars, the ATM350GL UniMount mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491G guitar mount and strong, flexible AT8490L 9″ gooseneck, the mic can be securely fastened to a guitar or other stringed instrument with a body depth of 90-135 mm.
The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.
-Low-profile mic design for minimum visibility
-Crisp, clear, well-balanced microphone response, even at high SPLs
-Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
-UniMount guitar mount with thumbscrew-adjustable clamp attaches securely to guitars and other stringed instruments with body depths of 90-135 mm, and provides excellent shock resistance for the microphone
-Rugged UniMount 9″ gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
-In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
-Interchangeable elements available for hypercardioid and omnidirectional polar patterns
-Included violin mount with hook-and-loop fastener provides an additional mounting option
SPECIFICATIONS
ELEMENT-Fixed-charge back plate, permanently polarized condenser POLAR PATTERN-Cardioid FREQUENCY RESPONSE-40 – 20,000 Hz LOW FREQUENCY ROLL-OFF-80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY- -49 dB (3.5 mV) re 1V at 1 Pa IMPEDANCE-200 ohms MAXIMUM INPUT SOUND LEVEL-159 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE-(typical) 130 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO-65 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS-11- 52V DC, 3.5 mA typical SWITCH-Flat, roll-off WEIGHT (MICROPHONE)-14.5 g (0.5 oz) WEIGHT (POWER MODULE)-90 g (3.2 oz) DIMENSIONS (MICROPHONE)-37.8 mm (1.49”) long, 12.2 mm (0.48”) maximum body diameter DIMENSIONS (POWER MODULE)-92 mm (3.62″) long, 18.9 mm (0.74″) diameter OUTPUT CONNECTOR (POWER MODULE)-Integral 3-pin XLRM-type CABLE 4.0 m (13.1′) long (permanently attached to microphone), 3.2 mm (0.13″) diameter, 2-conductor shielded cable with HIROSE HR10-type connector OPTIONAL INTERCHANGEABLE ELEMENTS-UE-H hypercardioid (100ï¾°) UE-O omnidirectional (360ï¾°) ACCESSORIES FURNISHED-ATM350a cardioid condenser microphone; AT8543 power module; AT8491G UniMount guitar mount; AT8490L UniMount 9″ gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case AUDIO-TECHNICA CASE STYLE-M36
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.
ï¾
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.